Made in Montana!
The Woodcutters Helper™ is precisely that; it measures firewood to your exact specifications as you saw, or it can be used as a guide to rip rough cut lumber. This chainsaw accessory is a simple, effective timesaving tool.
Measure as you saw your firewood. The Woodcutters Helper is versatile, accurate, simple to use and affordable! It’s capable of measuring firewood to any length you require. It attaches to any location on either side of the chain-saw bar using a strong neodymium magnet (Rated @ 48.5 lbs. pull force) and is adjustable from 0.5″ up to 16″. Just attach the end of your tape-measure to the magnet and adjust the indicator to the desired length or width.
If you burn firewood longer than 16″, set the measuring tool/indicator for half the length you require and complete your cut at the second mark, or the 20″ adjustable fiberglass version can be found on eBay.
Why be measuring when you can be sawing?
The time you save using the Woodcutters Helper pays for itself the first time you use it and the results are excellent!
Firewood the same length stacks tighter and neater saving space. Never struggle with a piece of firewood too long to fit your stove.
Note: Depending on how the wood is situated will help determine where on the chainsaw/bar you will want to place the Helper. If the log/wood is lying on the ground, placing the Helper on the tip of the bar allows you to make a nibble mark with the saw along the length without bending over. In some situations you may want to complete the cut at the same time. In other situations, as when measuring large rounds, the Helper can be placed further back on the bar. The Helper measures the same length when placed on either side of the chainsaw bar. The side you attach it to is a personal preference unless the wood is situated in a manner that only allows you to saw from one direction.
Watch a short demo
This video is of the original Woodcutters Helper and is for illustration only, the version offered from this listing is for the 16″ adjustable fiberglass.
Hook the clip to your belt loop or pocket and then use the magnet to attach the tool to the clip. It hangs from the clip within easy reach. (The free spring clip may vary in type and design depending on available stock).
The 3/16″ fiberglass rod is currently only available in high-viz orange which aids in locating the tool if you have placed it somewhere or it has fallen in the brush or snow.
Woodcutters Helper 16 inch adjustable fiberglass version only $20.00 each, includes free shipping within the U.S..
We want you to be completely satisfied with your purchase. Please do not hesitate to contact us with any questions.
———- :-) (-: ———-
Return policy: This item may be returned undamaged (with purchase price fully refunded) in original shipping container within 14 days of receiving the item. Buyer pays return shipping.
As the creator and manufacturer of the Woodcutters Helper we have the ability and reserved the option of changing configurations for various versions regarding magnetic pull force and dimension or material of the measuring rod. The original Woodcutters Helper adjustable up to 19.25″ utilizes a neodymium magnet with a rated pull force of 48.5 lb. coupled with a zinc plated steel rod. The 16″ fiberglass version, offered from this listing uses the same magnet coupled with a 3/16″ high-viz fiberglass rod. Due to the shorter length and lighter material, it’s extremely stable on the chainsaw bar.
Disclaimer: In no event shall IMT/imtusa, ChainsawAccessories.biz/WoodcuttersHelper.com, owners, employees or affiliates be liable for any direct, indirect, or consequential damages whatsoever arising out of or in connection with the use of any product or content posted on this listing/site. The use of any product sold from this listing/site is at the sole discretion of the user and safe-operating procedures should be strictly adhered to. By ordering any product from this listing/site you agree to use the product at your own risk.